A Technique to Obtain and Transfer Jaw Relation Records from Conventional Complete Denture to Implant-Supported Complete Denture

Crossmark: check for updates

Authors

  • Fei Liu Department of Biologic and Materials Sciences, Division of Prosthodontics, University of Michigan School of Dentistry, 1011 N University Ave, Ann Arbor, MI 48109, USA
  • Radi Masri Department of Endodontics, Prosthodontics, and Operative Dentistry, University of Maryland, School of Dentistry, 650 W Baltimore St, Baltimore, MD 21201, USA

DOI:

https://doi.org/10.17140/DOJ-2-109

Keywords:

Jaw relation transfer, Conventional complete denture, Implant-supported complete denture

Abstract

Prior to the fabrication of implant-supported fixed complete dentures, the existing or
transitional removable complete dentures can be used to establish the optimal jaw relation. This
article introduces a simple technique to accurately transfer the established jaw relation from
removable complete denture to final fixed prosthesis.

References

Stellingsma C, Vissink A, Meijer HJ, et al. Implantology and the severely resorbed edentulous mandible. Crit Rev Oral Biol Med. 2004; 15: 240-248. doi: 10.1177/154411130401500406

Batenburg RH, Meijer HJ, Raghoebar GM, et al. Treatment concept for mandibular overdentures supported by endosseous implants: A literature review. Int J Oral Maxillofac Implants. 1998; 13: 539-545.

Quirynen M, Naert I, van Steenberghe D, et al. A study of 589 consecutive implants supporting complete fixed prostheses. Part I: Periodontal aspects. J Prosthet Dent. 1992; 68: 655-663. doi: 10.1016/0022-3913(92)90383-L

Priest G, Smith J, Wilson MG. Implant survival and pros-thetic complications of mandibular metal-acrylic resin implant complete fixed dental prostheses. J Prosthet Dent. 2014; 111(6): 466-475. doi: 10.1016/j.prosdent.2013.07.027

Abbo B, Razzoog ME. Transferring the existing occlusal ver-tical dimension using a duplicate denture. J Prosthet Dent. 2007; 98: 68-69. doi: 10.1016/s0022-3913(07)60037-7

Rodrigues AH, Morgano SM, Guimaraes MM, et al. Labo-ratory-processed acrylic resin provisional restoration with cast metal substructure for immediately loaded implants. J Prosthet Dent. 2003; 90: 600-604. doi: 10.1016/s0022391303005882

Daher T, Meserkhani PV, Baba NZ, et al. Time-saving method for the fabrication of a definitive cast for an implant-support-ed prosthesis. J Prosthet Dent. 2007; 98: 70-71. doi: 10.1016/ s0022-3913(07)60038-9

Zafiropoulos GG, Galil AA, Deli G. An interocclusal record-ing method for the fabrication of full-arch implant-retained res-torations. J Oral Implantol. 2014; 40 Spec No: 357-364. doi: 10.1563/AAID-JOI-D-11-00232

Papaspyridakos P, Lal K. Simple technique to transfer oc-clusal vertical dimension and articulate a definitive implant cast for a full arch implant prosthesis. J Prosthet Dent. 2008; 100: 320-322. doi: 10.1016/S0022-3913(08)60215-2

Downloads

Published

2015-02-18

How to Cite

Fei Liu, & Radi Masri. (2015). A Technique to Obtain and Transfer Jaw Relation Records from Conventional Complete Denture to Implant-Supported Complete Denture. Dentistry, 2(1), 44–46. https://doi.org/10.17140/DOJ-2-109

Issue

Vol. 2 No. 1 (2015): Volume 2 Issue 1 2015

Section

Articles

License

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

All content published in Dentistry (DOJ) is licensed under the Creative Commons Attribution 4.0 International License (CC BY 4.0). This license allows anyone to copy, distribute, transmit, and adapt the work — including for commercial purposes — provided appropriate credit is given to the original author(s) and source.