Use of Ohmmeter for Detection of Leak in Hydraulic Penile Prostheses: A Case Report

Crossmark: check for updates

Authors

  • Luis Barragan Department of Urology, Baylor College of Medicine, Houston,Texas, USA
  • Irving J. Fishman Department of Urology, Baylor College of Medicine, Houston,Texas, USA

DOI:

https://doi.org/10.17140/UAOJ-5-139

Keywords:

Hydraulic urinary prostheses, urinary incontinence, Ohmmeter, artificial urinary sphincter (AUS)

Abstract

Hydraulic urinary prostheses have generally been accepted as important treatments for erectile dysfunction and urinary incontinence. Complications of these devices are usually treated with replacement if they fail after 5-years, based on the recommendations of their manufacturer. However, if devices fail prior to that time, the source of the defect must be localized so that the defective component can be identified and replaced. The following case demonstrates such a situation.

References

Selph JP, Belsante MJ, Gupta S, Ajay D, Lentz A, Webster G, et al The ohmmeter identifies the site of fluid leakage during artificial urinary sphincter revision surgery. J Urol. 2015; 194(4): 1043-1048. doi: 10.1016/j.juro.2015.05.075

Webster GD, Sihelnik SA. Troubleshooting the malfunctioning Scott artificial urinary sphincter. J Urol. 1984; 131(2): 269-272. doi: 10.1016/s0022-5347(17)50343-2 Case Report | Volume 5 | Number 1|

Downloads

Published

2021-05-28

How to Cite

Luis Barragan, & Irving J. Fishman. (2021). Use of Ohmmeter for Detection of Leak in Hydraulic Penile Prostheses: A Case Report. Urology and Andrology , 5(1), 15–16. https://doi.org/10.17140/UAOJ-5-139

Issue

Vol. 5 No. 1 (2021): Volume 5 Issue 1 2021

Section

Articles

License

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

All content published in Urology and Andrology (UA) is licensed under the Creative Commons Attribution 4.0 International License (CC BY 4.0). This license allows anyone to copy, distribute, transmit, and adapt the work — including for commercial purposes — provided appropriate credit is given to the original author(s) and source.